Sit & Go Strategy

1. In the early stages of a tournament play tight, don’t get involved unless you have a big hand (AA, KK, QQ, AK) for the first few blind levels. If you have AA, KK, or QQ, try to get all-in before the flop. Your preferred plan with AK is to re-raise a raiser all-in and have him fold. If you see a flop with AK and you didn’t hit a pair, you probably need to get out.

2. Call with a pocket pair (e.g., 88) only if it costs you less than about 1/15th of your chips to call. Remember that your plan is to flop a set or an over-pair. If you don’t flop a set or an overpair, get out. If you flop a set, try to get all your chips in the middle. If you flop an overpair, you may want to go all-in. It’s your call, but be careful.

3. If you’re the second person to put in a raise, it’s usually not correct to raise the minimum amount. A good rule of thumb is to raise about the size of the pot. For instance, suppose everybody has 1000 chips, and it’s 20 to go. One person calls, the next makes it 40. If you have KK, you should not raise to 60. There are a few options here:

  1. 1. Raise the pot. That would be a raise of about 130 chips (including the 10 and 20 chips blinds that are already in).
  2. 2. Raise a large amount that will really commit your opponent to the pot after the flop. For instance a raise to 400-500. When the flop comes down, if there’s no ace, then move the rest of your chips in.
  3. 3. Raise all-in right there. If somebody wants to call you with AJ or QQ, fine.

4. When betting after the flop, your bet must be some reasonable fraction (perhaps not less than 1/3 or 1/2) of the pot. Otherwise, you are giving drawing hands the correct pot odds to call. If they hit their draw, they can now put you all-in. Unless you have an unbeatable monster (the nuts), it’s rarely correct to “suck people in.” You want them out.

5. When you make a bet with what you believe to be the best hand, bet enough so that an opponent with the most obvious draw would be making a mistake to call. For instance, suppose you have QQ, and the flop is J-7-3 with two spades. You are concerned about the possibility of a spade flush draw being out against you. The probability of that person hitting a flush is about 20% (one in five times) on the turn card. Make sure you bet more than 1/5th of what somebody could win from you if he hits his flush on the turn.

6. Conversely, don’t call with a draw unless you can get the right pot odds. Suppose there are 100 chips in the pot on the flop. You and your opponent each have 800 chips. If he bets 400 chips on the flop and all you have is a flush draw, you can’t call – you’re not getting the right price.

7. It is almost always better to be the bettor or raiser than the caller. Particularly in all-in situations, you would much prefer to have “fold equity” – that is, your opponent folds and you don’t have to have a showdown. So in general, you need a much stronger hand to call all-in than you do to bet (or raise) all-in.

8. If you’re going to make a bet or raise, and you will be “committed” to the pot after that bet or raise, then go ahead and put all of your chips in. That is, suppose you and your opponent have 1000 chips each. If you bet 900 before the flop and he calls, there will be (at least) 1800 chips in the pot after he calls. There is virtually no flop that would make it correct to fold for your last 100 chips. So go ahead and bet all 1000 right now. The only time this might be correct is if your opponent will make the analogous mistake. That is, he won’t call all 1000 chips right now. But he will call 800 chips now, and then feel obliged to call his last 200 after the flop. If he’s that kind of player, it might be a correct play with a huge hand like AA.

9. At the later stages of the tournament when you get near the cash, particularly on the bubble (one more player to bust out before everybody is in the money), many players will become extremely tight and play very conservatively.